Hardscape Depot: Rock Solid Products and Service
1 (844) 826-3781 |

XTREME BOND Polyurethane Adhesive Cartridge 29 Oz - 6 Pack

  • Brand: HARDSCAPE DEPOT
  • Product Code: HDXTREME-29OZ-B6
  • Availability: In Stock
$61.08

Extra Strength Masonry Adhesive 29 oz for Stone, Concrete, Building Materials - 6 Pack

XTREME BOND™ Masonry Adhesive is a premium quality, high strength masonry glue for stone, concrete and other building materials.  Designed for hardscape and masonry trades, XTREME BOND Masonry Adhesive is known for it's quick adhesion, fast cure, and ability to be used on wet or frozen surfaces and at extreme temperatures, hot or cold. It produces a permanent and unyielding bond overnight to almost any substrate or building material under a wide range of temperature and moisture conditions. XTREME BOND Masonry Adhesive is formulated for concrete and cement blocks, brick, stone, retaining walls, capstones, slate, pavers, lumber, metal and more. Build stable, strong structures and make efficient repairs easily, save money when you buy by the 6-pack, 12-pack or case.


Xtreme Bond Extra Strength Masony Adhesive for Concrete, Stone, and Building Materials


Features:

  • Professional Strength
  • Permanent overnight bond
  • Up to 3 times the strength of conventional adhesives
  • Bond is typically stronger than the materials being bonded
  • Long open time allows repositioning before bonding
  • Use in extreme temperatures
  • Sub-freezing up to 250° F
  • Wet and Frozen Surfaces
  • Quick adhesion and fast cure
  • Will not crack or lose bond over time

The adhesive is a one-component premium polyurethane adhesive manufactured for HARDSCAPE DEPOT™ by a recognized leader in the industrial coatings and adhesives industry.  With superior bonding, this masonry glue is weatherproof and can be used for multiple surfaces including brick, cement and concrete blocks, retaining walls, lumber and more.

XTREME BOND Masonry Adhesive reacts and cures with airborne moisture forming a formidable bond between the surfaces. It has incredibly quick adhesion and a fast cure. It is formulated for difficult installation temperature extremes (hot and cold) and will adhere to both wet or frozen surfaces where others fail.

This adhesive permanently bonds a wide array building materials - stone, brick, concrete, wood, metal and even fiberglass - with outstanding results. The 29 oz. size is suitable for contractors / pros / larger jobs. The 6-pack shown is is one of our most popular ways to buy.  You can also buy 29 oz. tubes of XTREME BOND Adhesive as a single cartridge or in a 12-pack, see Related Products below.

The cartridge is designed to be used with our 13" Caulking Gun.


Testimonial for Xtreme Bond Extra Strength Masonry Adhesive

"I've been in the mason trade for 40+ years and had companies in Ohio, Florida and now Colorado. I've tried many adhesives through the years but with no success, either they can't cure in cold weather or moisture/high humidity keep them from sticking to the stone. I found Xtreme Masonry glue at a trade show about 8 years ago. Couldn't believe the claims they were making and to say I was skeptical is an understatement. We tried some samples and we've been using it ever since. Nothing on the market compares with it. We usually glue the stone in place during our long working days and when we come back the next day it's set just where we left them."

"Trust this old fart, It's the best thing out there pure and simple. We use the larger contractor cartridges because it cost less on larger jobs."

Don Collier
D&G Concrete Designs
March 2016

Xtreme Bond Block Adhesive used in freezing temperatures.  Photos shows 29 oz size.


Free Xtreme Bond Masonry Adhesive Sample Cartridge for Hardscape Depot Customers

General
Compliance ASTM D 3498, FHA Bulletin UM-60, meets or exceeds all requirements of the American Plywood Association Specification AFG-01, Adhesive for Gluing Plywood to Wood Framing
Composition High-solids polyurethane elastomer that cures by reaction with atmospheric moisture
Freeze/thaw stability Does not freeze
Not recommended for: Under water applications
Recommended for Most rigid building materials: brick, concrete, stone, pavers, masonry, treated and untreated lumber, metal, plywood, fiberboard, cement board
Service Temperature Up to 250 ° F
Shelf Life 1 year when properly stored
Shrinkage None
VOC 0.38 lbs/gal, less water and exempt solvents
Working or open time Up to 1 hour
Shopping
Ships in: 1 Business Day

Technical Spec Sheet

Download Xtreme Bond Adhesive Technical Spec Sheet (PDF).   Download Xtreme Bond Technical Sheet (PDF)

For Best Results

  • Wear gloves during application of adhesive; once cured, material cannot be removed.
  • If adhesion to a material is unknown or in question, you should do a test application first.
  • Do not use in applications that require continuous submersion.
  • Do not use in applications where temperatures rise above 250 ° F.

Surface Preparation

All surfaces must be structurally sound, clean, and free of dirt, loose particles, oil, grease, asphalt, tar, paint, wax, rust, waterproofing or curing and parting compounds, and membrane materials.

METAL
Remove scale, rust or other coatings to expose a bright white surface.

CONCRETE, STONE, MASONRY
Clean by grinding, sandblasting or wire brushing to expose a sound surface free of contamination and laitance.

LUMBER, WOOD
The surface must be clean and sound. Scrape away paint to bare wood.

Priming

HD Xtreme Bond Masonry Adhesive Caulk bonds well to most substrates; however, it is the user’s responsibility to check the adhesion of the cured adhesive on specific substrates.

Application

  1. Apply by caulking gun or trowel.
  2. Wearing gloves during application is highly recommended. Once Xtreme Bond has cured it cannot be removed.
  3. Because of the high strength provided by Xtreme Bond adhesive, do not apply it as heavily as you would a conventional adhesive. Cut the smallest possible opening in the spout to render the appropriate-sized bead. Be certain to fill all gaps between materials.
  4. Materials may be repositioned without loss of adhesive strength up to one hour after application.
  5. When necessary use mechanical fasteners to hold materials in place until adhesive has fully cured.

Curing

Xtreme Bond Masonry Adhesive forms a firm set in 1 - 2 hours, and a tenacious bond overnight. Cure time varies with temperature, humidity, and the porosity of the materials joined.

Clean Up

Clean all tools and equipment immediately after use with a dry cloth; Xylene, mineral spirits or acetone may also be used. Cured material must be mechanically removed.

Testimonials

"Mi nombre es Hubertino, me he dedicado en la albañeria de piedra for 35 años y mi padre fue el que me enseñó y el fue educado en el comercio por su padre, asi que soy la 3ra generación de albañil de piedras."

Yo hago mi vida haciendo projectos de calidad para mis clientes, para que ellos los disfruten. El problema más grande que tengo al estar trabajando en Colorado es el trabajar en las diferentes épocas dificiles de nieve y lluvia. Si no tengo trabajo, no puedo darle de comer a mi familia. Yo uso “Xtreme Bond” porque me da la oportunidad de trabajar durante todo el año. No he encotrado otro producto que resista tanto como este y que funcione en la lluvia o en nieve tan facilmente. Yo uso el tubo más grande, porque uso mayor cantidad y me cuesta menos en los projectos. Yo no le queria decir a nadie sobre “Xtreme Bond” para poder tener el secreto solo para mi y no para mi competencia."


Translation: "My name is Hubertino, I have been laying stone for more than 35 years and I was taught by my father and he was schooled in the trade by his father, so I am 3rd generation stone mason."

I make my living by building quality projects for my customers so they can enjoy them. A big issue I have here in Colorado is working in difficult weather like rain and snow. If I’m not on the job I’m not feeding my family. I use Xtreme Bond because it allows me to work year round and I have not found another product that holds as strong as this one and can handle rain or snow very easy. I use the larger size tube because we use so much of it and it costs much less over a project. I didn’t want to tell anybody about Xtreme so I could keep the secret for me only and not my competition."

Hubertino Rojas
Masonry Perfection
July 2016

Xtreme Bond Block Adhesive used in freezing temperatures.  Photos shows 29 oz size.

"I've been in the mason trade for 40+ years and had companies in Ohio, Florda and now Colorado. I've tried many adhesives through the years but with no success, either they can't cure in cold weather or moisture/high humidity keep them from sticking to the stone. I found Xtreme Masonry glue at a trade show about 8 years ago. Couldn't believe the claims they were making and to say I was skeptical is an understatement. We tried some samples and we've been using it ever since. Nothing on the market compares with it. We usually glue the stone in place during our long working days and when we come back the next day it's set just where we left them."

"Trust this old fart, It's the best thing out there pure and simple. We use the larger contractor cartridges because it cost less on larger jobs."

Don Collier
D&G Concrete Designs
March 2016

HD Adhesive Warranty

We will replace any cartridge of our adhesive caulking products free of charge if found to be non-operational or unusable for up to 6 months from the date of purchase.